Double Shaft Paddle Mixer

Short Mixing Time

An average mixing cycle for dry mixing can be as follows: filling 20-30 seconds, mixing 40-60 seconds and discharging 10-20 seconds. This gives a total cycle time of 1.5 – 2 minutes.

Lower Production and Maintenance Costs

The benefits of the mechanical fluidizing zone are gentle mixing, no segregation and very short mixing time. This gives savings in terms of minimal wear and tear and low energy consumption. Maintenance costs are also very low.

Easy Cleaning of Mixer

Side access doors for entry into the mixer interior can be provided. These also provide access for cleaning the mixer internals after completion of the batch.

Higher Throughput

Because of the short mixing time,thus resulting in savings, both in investment costs and space requirements.

Reliable Scale Up

The simple design and mixing principle ensure that lab test-results can be reliably scaled-up to production levels.

Gentle Mixing

Shear is very low, As a result extremely fragile materials can be mixed with minimal degradation.

Working Principle

The material in the double shaft paddle mixer is subject to two opposing rotating rotors, which are in conforming motion. On the one hand, the paddle belt animal material rotates counterclockwise along the inner wall of the machine tank.On the other hand, the paddle material animal is turned left and right, and a weightless area is formed at the intersection of the two rotors. In this area, regardless of the shape, size and density of the material, It can make the material float in an instant weightless state, which enables the material to form a continuous turning in all directions in the machine trough, which can be staggered and cut each other, so as to achieve the effect of rapid, gentle and uniform mixing.